this is what I call a semi flexible fillet knife. It bends mostly in the top third of the knife by the tip. It is 61 HRC (hardness measure most fillet knifes are around 50-55 HRC). It has a pronounced distal taper from 1/8 at the handle to under 1/16 at the tip. in the picture below I am pushing down with moderate pressure. Handle wood is blue dye stabilized cotton wood and East Indian rosewood which is a naturally oily wood that cannot be stabilized.
this is what I call a semi flexible fillet knife. It bends mostly in the top third of the knife by the tip. It is 61 HRC (hardness measure most fillet knifes are around 50-55 HRC). It has a pronounced distal taper from 1/8 at the handle to under 1/16 at the tip. in the picture below I am pushing down with moderate pressure. Handle wood is blue dye stabilized cotton wood and East Indian rosewood which is a naturally oily wood that cannot be stabilized.
Image 1 of 4
Image 2 of 4
Image 3 of 4
Image 4 of 4